Concrete Coring Miramar and South Florida Trust from Safe2Core Miami
The average construction site is riddled with hazards both seen and unseen. Rebar, post-tension cables, utility lines, and services such as plumbing, gas, electrical, and dedicated fiber optic cables and conduits are often impregnated into walls, floors, driveways, and sometimes even parking lots by incorporating them into the wet cement or hot asphalt at the pour or placement phase. This makes being able to properly locate, identify and avoid these obstructions during selective concrete sawing, coring, and drilling operations more important than ever before.
You probably already know Safe2Core Miami serves South Florida from Miramar to Pompano Beach FL and beyond with X-ray and GPR scanning of asphalt, brick, concrete, and other surfaces, using the latest technology to enable contractors and pavers to quickly and easily see what lies below or behind the surfaces they need to cut and core.
This technology is easy on a contractor budget and aids cutting and coring projects by increasing accuracy, efficiency, and safety while helping operators prevent damage to underground or in-wall utilities, support structures, electric conduit, and other hazards.
But did you know Safe2Core Miami also offers concrete coring, cutting, and drilling?
It’s true! Many contractors don’t have the specialized coring equipment they need to safely and precisely cut or core concrete, asphalt, and masonry when they need to pull in situ testing samples or to create new pathways for utilities, manholes to access sewer lines, and underground utility control vaults. This means they have to dip into their budget to rent this equipment or hire a third party to do the work for them. But if Safe2Core Miami is already onsite, why not let us do it for you?
Safe2Core’s skilled, trained, certified operators are adept at serving and assisting your crew with GPR scanning to locate, identify and avoid obstructions in the concrete matrix. We also have the capability to provide the actual coring work, including:
- cement coring
- chain sawing
- concrete cut operations
- concrete demolition
- concrete removal
- concrete sawing
- core drilling and in situ sampling
- hand sawing
- slab sawing
- track sawing
- wall sawing
- wire sawing
- and more!
To learn more about how Safe2Core Miami can help your contractor in the 305, Brevard County, or the Miramar area with your concrete coring, sawing, drilling, and coring needs, keep reading for our FAQs about concrete coring!
Frequently Asked Questions About Concrete Coring Miramar Contractors Ask
Safe2Core makes coring, cutting, and sampling cured concrete, asphalt, and masonry easier and safer than ever before!
Question: Why would we need concrete coring services in Miramar? –Miguel, Miramar, FL
Answer: Depending on the type of project, there are all sorts of reasons concrete coring miami might be needed. For a residential patio slab on grade, you may not need it. Likewise, if you’re doing a much older residential home demolition, where there’s unlikely to be much if any foreign matter in the foundation.
But for just about any home or commercial space built within the last 30 years or so, having a specialized concrete cutting service who can identify and avoid obstructions within the foundation and walls is invaluable for CSI-style concrete sampling and forensic testing, drilling to set epoxy bolts, access damaged or compromised utility lines, or create raceways for conduits and piping.
Even more importantly, it can save your crew time, money and risk by ensuring you’ve got properly trained personnel doing the cutting, so you know it’s done right the first time, every time, with less worry about inadvertently damaging underlying structures and conduits while giving you the quick results you need!
Question: Do you need a license to core or drill concrete in Miramar? –Ruth, Miramar, FL
Answer: Yes. Any time you do concretecoring, drilling or cutting on a structural member of the area where cuts are needed, you need a licensed and certified contractor onsite working under the supervision of the general contractor and professional engineer for the project. This is to ensure compliance with applicable building codes and that the work is done properly and in the correct location. This applies to concrete, asphalt and masonry. For more info on this, click here to view the requirements for a Miramar contractor license to saw and core concrete. Safe2Core Miami is properly certified, licensed, bonded and insured to take care of all your concrete coring, including the specialized saws and drills necessary to get the job done quickly, correctly, smoothly and safely!
Question: I’m trying to keep an eye on my budget and make sure my overhead stays low. What does Safe2Core Miami’s pricing include? –Merlyn, Miramar, FL
Answer: Safe2Core’s pricing is based on the size of the job, the anticipated length of the site visit and any equipment we need to bring. A simple scan of a residential slab on grade will obviously take less time and equipment than scanning a 100,000sq.ft. warehouse building pad and drilling core samples at multiple locations. In addition, an electric or hydraulic hand saw may use different blades and have different wear and tear concerns than track saws or wire saws. To learn more about our pricing for your specific project, we invite you to contact our friendly sales and scheduling department so we can get the information we need to ensure you get the best possible price and value for your concrete cutting needs.
Question: Do we really need to have the concrete scanned and cut on a demo job, or can we just go in with a Bobcat and hog it out? –Billy, Miramar, FL
Answer: Generally speaking, yes. A lot depends on what the demolition permit stipulates as required removal protocol for the specific type, size, and age of the structure in question. Your general contractor, civil engineer of record for the project and/or your project manager should all have this information, as well as the city or county building department. If you’re unsure, it’s always better to make sure you have a properly skilled, certified contractor in place than to find out the hard way that you needed one when a hidden obstacle becomes a major hazard or worse, leads to a fatality. For more information about specifics for your project, contact Safe2Core Miami today!
Question: Why does it matter if we have a core drill or specific concrete cutter? Aren’t they all the same? –Quinn, Miramar, FL
Answer: A core drill is a specially designed hollow drill that creates a nearly perfect round hole of a specified dimension. Concrete and masonry saws and drills are equipped with specially hardened bits. Many of these are made of carbide steel impregnated with industrial-grade diamonds, which helps them keep their shape and cutting capability longer under the temperatures and forces inflicted upon them with heavy use. In addition, unlike a conventional drill or saw which is cooled by air, core drills and masonry cutting equipment typically use water, which helps both to lubricate and cool the blade or bit as it bites down into the material. These are specifically designed to create smooth, clean cuts and not bind or warp in the material or deform the cores they extract, which is important for forensic testing purposes such as mix design compressive verification and conduit running.
All of this is the long way of saying no, all drills and cutters are not the same. If you try to use the wrong bit, blade, or tool for the job, you’re more likely to damage the equipment, the material, and possibly the person using it than you are to get the results you need. Safe2Core Miami has a wide range of masonry cutting saws, coring, and drilling bits, each one designed for maximum life and performance, and the trained, certified personnel to use them properly and safely. For concrete coring Miramar can rely on, give us a call and let us take care of it for you!
Question: What are some common problems we could run into if we don’t core concrete the right way? –Florian, Miramar, FL
Answer: The most common issue with cutting concrete incorrectly is breaking the equipment you’re using and/or injury to the person using it. This often happens because of trying to go too aggressively when cutting the material or using the wrong type of cutter for the application. Slightly less common, but still not unusual, is creating a cut that’s longer, shorter or angled in a way you didn’t intend, which can lead to patching problems later. Then of course there’s the risk of damaging structural members or utilities within or just under the matrix. If you nick a piece of rebar, this could be inconvenient. Hit a water line and you could have a really tedious repair and cleanup on your hands. Damage a fiber-optic line and you could knock out internet service to the entire structure. Strike a gas or electrical line and the results could literally be explosive—and deadly. And of course, if you’re submitting core samples for laboratory testing, a warped, twisted or improperly cut core may be unusable, meaning another one has to be cut, costing you extra time and money.
Question: Are there any special considerations we need to take into account before we make a concrete core? –Jack, Miramar, FL
Answer: The first thing to consider is the age of the material you’re cutting. Concrete mix design technology has changed significantly in the last 30 years, never mind since the ancient Romans first started using it for pavers and other construction! The second question is what’s in the matrix, and how closely the as-built drawings adhere to the actual placement of rebar, utility, and other lines, or whether hidden obstructions and embeds are shown at all. Next, you need to know if you have the right equipment for the job and whether you have properly trained personnel available to use it. If all that sounds like a headache, Safe2Core Miami can make it simple with the latest GPR concrete scanning and cutting technology, as well as the training and know-how to do the job fast, easily, safely, and correctly!
Notable Places for Contractors to Visit in Miramar, Florida
If you work in the construction industry in Miramar, you’re probably going to get to know these places well. Safe2Core Miami is here to make your project easier by giving you a quick guide to some of the better-known departments you’ll need to visit at least once in a while. Be sure to read below for a couple of sights you may want to take in when you’re off the clock, too!
2300 Civic Center Pl, Miramar, FL 33025
They say you can’t fight City Hall, but there’s nothing to stop you from visiting! Miramar’s City Hall is the nerve center for all government agencies in the area. A graceful complex in the finest Art Deco tradition, City Hall houses just about all the city offices a contractor might need or want.
9001-B Pembroke Rd, Pembroke Pines, FL 33025
Not sure if you’re trying to contact the right city department? Playing phone tag with government agencies? Try the Miramar Chamber of Commerce! With links to important agencies and local points of interest, it’s a great place to check out both for business information and leisure-time activities.
Fun Things to Do in Miramar
If you like rock music (and who doesn’t?), the Seminole Hard Rock Hotel and Casino is the place for you! Memorabilia, good music and legendary performers round out a posh vibe. If that’s not enough excitement for you, belly up to the poker tables, roll the bones at craps, take your shot at roulette and enjoy Vegas-style gaming and see if Lady Luck has your back!
For family-friendly fun, C.B. Smith Park is hard to beat. Batting cages, basketball, miniature golf, fishing and a seasonal water park make this 29-acre park a terrific destination for dates, days off or just playing hooky. We won’t tell your boss or your kids’ teachers if you don’t!
Want to take getting away from it all to another level? Bring your trail mix, your bike and your tent to Greynolds Park. A whopping 265-acre park just north of the city proper, this quiet and secluded park is a great place for hiking, biking and camping.